Supply Voltage 3 phase , 380 volt, 50 Hz, +/-% 10

Electrode Voltage : 80-.100 volt D.C. 10 levels ).

Electrode Current : 0-100 Amper (20 levels).

Erosion frequency : 0-50 kHz.

Microfinish: 250-300 volt., 250 kHz,  

Microfinih: 0.2µm.

ServoSpeed : 0.1 -2 mm/sn.

Rapid Up/down Speed : 20 mm/sn.

Finest Surface finish :low voltage : 1 µm,  

Minimum Electrode wear: 1/1000. by volume

Pulsed Cutting and Flushing : pulse 0,5-2sn.,Cutting : 1-5 sn.

Electrode Materials :Cu , Grafit, Cu Alloys

Work Piece ; All steels , metals and Alloys tungsten,

Carbides and sintered metals